Hi Experts,
What is the max value that could be set for Max concurrent job value in Adaptive Job Server for Webi Scheduling Service ?
I was under an impression that it depends upon hardware; however there's an SAP Note: 1797304 which informs that the max value could be 32.
Regards,
Diego
Please suggest me what should i do
when i upload a file for dso when i click on priview data its is showing data and error comes is below attachment
thanks
Anshul Sharma
Hello,
Need help, I am getting every other day issue in BI 4.0 with error as below,
llegal access to the viewer, please use a valid url.
I had to restart SIA to restore service, I have seen similar issues in this forum but the fix was license key however when I look at the glf logs the issue seems here related to memory.
could someone give some ideas here please. Attached are logs from system.
**ERROR:dgWICDZCore:Document not loaded [kdgWICDZCore.cpp;627]
**ERROR:MemoryManagement:Current process size 8.28162e+010 + 0 is over maximum limit 6e+010 [kctMemoryManagement.cpp;57]
**ERROR:MemoryManagement:Current process size 8.30736e+010 + 0 is over maximum limit 6e+010 [kctMemoryManagement.cpp;57]
**ERROR:MemoryManagement:Current process size 8.33239e+010 + 0 is over maximum limit 6e+010 [kctMemoryManagement.cpp;57]
**ERROR:MemoryManagement:Current process size 8.35629e+010 + 0 is over maximum limit 6e+010 [kctMemoryManagement.cpp;57]
**ERROR:MemoryManagement:Current process size 8.38148e+010 + 0 is over maximum limit 6e+010 [kctMemoryManagement.cpp;57]
**ERROR:MemoryManagement:Current process size 8.40537e+010 + 0 is over maximum limit 6e+010 [kctMemoryManagement.cpp;57]
**ERROR:MemoryManagement:Current process size 8.40819e+010 + 0 is over maximum limit 6e+010 [kctMemoryManagement.cpp;57]
**ERROR:GenericContainer_CdzMgrPluginBase:out of memory [CdzMgrPluginBase.cpp;202]
GenericContainer_ContainerPluginManagerImpl:Release
GenericContainer_ContainerPluginManagerImpl:Release: 0
Uncaught Exception in SilentScope: GenericContainer_CdzMgrPluginBase:createSession: 0
Error=out of memory
**ERROR:GenericContainer_WorkEntityFactoryImpl:out of memory [WorkEntityFactoryImpl.cpp;209]
Uncaught Exception in SilentScope: GenericContainer_WorkEntityFactoryImpl:createSession: 0
Error=out of memory
**ERROR:MemoryManagement:Current process size 8.42958e+010 + 0 is over maximum limit 6e+010 [kctMemoryManagement.cpp;57]
**ERROR:MemoryManagement:Current process size 8.45246e+010 + 0 is over maximum limit 6e+010 [kctMemoryManagement.cpp;57]
**ERROR:MemoryManagement:Current process size 8.47709e+010 + 0 is over maximum limit 6e+010 [kctMemoryManagement.cpp;57]
**ERROR:MemoryManagement:Current process size 8.48576e+010 + 0 is over maximum limit 6e+010 [kctMemoryManagement.cpp;57]
**ERROR:MemoryManagement:Current process size 8.49201e+010 + 0 is over maximum limit 6e+010 [kctMemoryManagement.cpp;57]
Uncaught Exception in SilentScope: GenericContainer_WorkEntityFactoryImpl:createSession: 0.016
Error=out of memory
**ERROR:MemoryManagement:Current process size 8.50071e+010 + 0 is over maximum limit 6e+010 [kctMemoryManagement.cpp;57]
**ERROR:MemoryManagement:Current process size 8.51788e+010 + 0 is over maximum limit 6e+010 [kctMemoryManagement.cpp;57]
Uncaught Exception in SilentScope: GenericContainer_CdzMgrPluginBase:createSession: 0.015
Error=out of memory
Hi,
I need to be able to provide certain users access to the Publication Logs. That is, when a publication is run and we can see the result and it failed we are able to select a button to view the detailed log.
The user is recieving the error "This error occurred: The object with ID XXX does not exist in the CMS or you do not have the right to access it (FWM 02020)"
The user in actual fact has "Full Control" of the folder where the publication is held...can only administrators view a log for a publication??
Cheers,
Hi,
We're planning an heterogeneous copy from Data Integration 11.7 on Windows/Oracle to Data Services 4.2 on Windows/SQLServer. We've readed on Best Practices for upgrading older Data Integrator or Data Services repositories to Data Services 4.2 - Enterprise Infor… that it's possible to create a copy of actual repository on to local repository and thus, connect this to a Data Services for doing the jobs upgrade. (Option 3)
Can we create this new local repository pointing to a SQL Server instance? Any experience about this kind of migration?
Many thanks!
Hi:
I need use dynamic images in History Lumira.
In my History, I have a numeric variable (porcentage), I wish to base dynamic images based on the porcentage.
If porcentage < 0.5 use Image1,
If porcentage >0.5 and < 0.9 use image 2
If porcentage >=0.9 use Image3
Is this posible???
Any idea or tip.
Example attached.
Thanks
Luis Sanchez
Hi,
We are trying to add Principals and assign Access Levels to Applications (Web Intelligence, Promotion Management, IDT, CMC etc ) via BO SDK. I could find the sample to do this on folders (http://wiki.scn.sap.com/wiki/display/BOBJ/Java+BusinessObjects+Enterprise+SDK+Samples#JavaBusinessObjectsEnterpriseSDKSamples-SecurityManagement).
When I tried to follow this logic I am confused which virtual table to query for Applications.
Kindly guide me in achieving this.
Hello,
We have a BI 4.1 SP06 patch 1 platform with 12 concurrents jobs maximum.
CMS System Database Connections Requested is set to 50.
I created a watchlist to know when we reach 12 concurrents jobs.
I also created a watchlist to know how many CMS database connections are available (SERVER.CentralManagementServer$'Established System Database Connections' - SERVER.CentralManagementServer$'Currently Used System Database Connections').
There is a thing which I don't really understand : each time I am receiving a danger alert concerning concurrent jobs (reaching 12), I am also receiving a danger alert about available database connections (less than 5 CMS BDD connections available).
Is there anyone who can help me to understand that ?
Moreover, during high utilization, we are reaching the max concurrent jobs and some of planned jobs are failing with this error :
"An internal error occured ... "processDPCommandsEx" API . (Error : ERR_WIS_30270)"
I am wondering if this error is linked to alert messages.
Thanks a lot for your help
Antoine
Hi All,
Is there any way to get my recently exported documents? i.e. I have exported some couple of Web Intelligence reports to PDF or Excel or other formats, those reports to be appeared in my recently exported documents. Similar to my recently viewed documents.
Please let me know, I have a requirement to get those documents.
Thanks in Advance.
Regards,
Sella Perumal
Hi,
I am currentky setting up the authroisations of a user who will be carrying out promotion management. The user should not be able to amend reports directly in production but should be able to migrate objects to production.
It seems if i use promotion management the user must be able to change objects in the target environment? This go against having production locked....
what process do you all use? I am thinking of having a separete logon to be used when in promotion mgt and you have to log into the target environment - this logon would have "change/update" rights.
Views?
Cheers,
I have two questions:
1) the post processing plugin for publications has an Optional parameter field. Where/how do I configure my plugin to get the parameters? Is "handle" overridden for parameter passing?
2) where can I find the javadocs for IPublicationPostProcessingPlugin?
Message was edited by: Andy Ellixson
Okay, I found the javadocs for IPublicationPostProcessingPlugin. However, with the exception of ILoggerAdapter, there aren't javadocs for any other Interfaces under package: com.businessobjects.publisher.common.
The following aren't located, so far, on the web: IFilterClause, IPersonalizationEntry, IScopeFilter,IScopeUserInfo
The example on coding up a Publication post processing plugin is really nice, but without these javadocs, I don't understand how anyone else would have known how to code up the solution.
andy
Message was edited by: Andy Ellixson
Am I able to delete a variant of stores in POSDW/MON0 POS Workbench? Please see attached.
Hi all,
I'm testing the universes I have upgraded from 3.1 to 4.1. I have this "issue" when I do these checks from my PC:
- with BOE 3.1 Universe Designer if I open the Universe "A" and I check the connection of the universe (File > Parameters > Connection Test) the are no problems
- If I open a webi report based on the upgraded universe "A" from the Launchpad on BI 4.1 there are no problems
but
- with BI 4.1 Universe Designe Tool if I open the same upgraded Universe "A" and I do the same check (File > Parameters > Connection Test) the error is "The server is not responding! (SBO0001)" - "CS: COM Provider CLSID not specified or erroneous".
What's the problem ?
Thanks,
Michele
hi sir
when i extract feild from pool in lo cockpit (
bergl
bosta
drukz
fxmsg)
it show me error entries of application 11 still exist in extraction queu please suggest me what should i face same error in lots of logistics
thanks
Anshul
Hi all,
I have an installation in which BW and BO are in the same machine. But when I create a JCO connection through Information design tool, it works fine for 2 or three refreshers and then it throws the following error: "An error occurred while trying to ping the server: The SAP BW server reported an RFC error: Erreur lors du rappel RFC : Failed to refresh repository reference @DF_DEST-17 2.16.1.3-BIUSER-0--0-100 cause"
And when I try the ping the machine it works fine. Can someone help me with that?
Here is my server configuration:
SAP BO : Business Objects Plateform BI 4.1 SP05 Patch9
SAP BW: 740 SP09
OS: Linux Suse
Best Regards,
We currently have BOBJ 4.1 SP5 Patch 3 installed.
We have been using sapcrypto.dll 32 bit version for scheduling Crystal reports on the BI Platforms using SAP BW data sources.
We now need to be able to schedule WEBI reports using Universes(unv) on BW data sources.
I read on SAP marketplace that WEBI reports need 64 bit sapcrypto.dll.
I also saw references to update the registry key for Crystal reports to work, when 64 bit dll is installed for WEBI.
When I check our system, I dont even see SAP BusinessObjects under HKEY_LOCAL_MACHINE > SOFTWARE > Wow6432Node
WINDOWS: HKEY_LOCAL_MACHINE > SOFTWARE > Wow6432Node > SAP BusinessObjects > Suite XI 4.0 > SAP > SNC_LIB_32
Does this mean that we can have both the 32bit and 64 bit sapcrypto dlls on the same same server.
Does anyone have experience doing these. I don't want to jump in and do it and end up breaking the crystal reports that works perfectly fine now.
(We had lot of issues to get the crystal reports working :-), don't want to get into the vicious circle )
Any advise is appreciated. Thank you very much :-)
Suman
We implemented Active Directory for Business Objects about a month ago, everything went smoothly. But there's one user who cannot log on to Business Objects. He can use AD to log on to several systems, e.g., Gmail, the ERP system for student information, and Blackboard. But just not BO.
We have tried everything to troubleshoot this, with no luck. He's changed passwords; I used his password as my own password; he tried on different machines. So it's something between BO and AD for this user only. I am waiting to hear from the network people, but wanted to post this in the interim.
Are there any logs in which we can see his attempted logins ?
Does BO actually store the users password for AD ?
Thoughts on how to troubleshoot this ?
Hi,
We used to create reports with microsoft Business Objects 5.0 which is no longer supported. Purpose is to show some basic reports depending on date range; retrieving from Oracle backend DB using sql queries. While searching for a similar reporting tool we found business objects edge version. My questions are:
1. Is business objects BI edge similar to the business objects 5.0 version? If not, can anyone please point me to a similar product?
2. While installation SAP Business Objects BI, Edge edition (trial version) I found different components like Server Part 1,Server Part 2, Server Part 3, Server Part 4, Client tools, .Net SDK Runtime, Crystal reports, BusinessObjects Explorer Windows etc. Do I need to install all these components?
Hi All,
1)Please confirm if the CMS is on linux OS and we need to configure SSO, then we would have to go for trusted authentication option.
2) Which method of trusted authentication is secured?
3) Can anyone please guide me on the steps to achieve trusted authentication on BI 4.1.
Many Thanks,
Shubha
Hi,
can somebody lead me to a kind of starting page where I can start reading about this functionality ? About starters-info, the principles behind it, the first steps to do when one would like to use this functionality, ...
Many thanks.
