Hello Everyone,
We need the list of report schedules that runs on every Saturday. Any way to get this information, i tried from Query builder, no clue from there.
Thanks,
Amit
Hello Everyone,
We need the list of report schedules that runs on every Saturday. Any way to get this information, i tried from Query builder, no clue from there.
Thanks,
Amit
Hello
I am using BOBJ Edge 4.1. How can I clean up the list in the recent tab in launch pad ? Several users open the wrong document.
Kind Regards
Hector
Hi
Does anyone know if there are any plans in the future of having SAP Business Objects Clients Tools installation in 64 bit ?
Hi All,
I need information on how to
1. disable save or save as but will be able to edit or modify
2. will not be able to edit or modify
Thanks
Coupon
Dear All,
My company planning to implement a project which require mass distribution of reports to agents.
Software: SAP BI Platform 4.1 SP 06
Method 1:
Scheduled a Webi publication with dynamic recipients to run monthly or quarterly to send to a folder, then our own web portal will grab the report, agents will access the report through web portal.
Number of reports: 5000 report
Format: PDF
Method 2:
Scheduled a Webi publication with dynamic recipients to run monthly or quarterly to send to each agent through email.
Number of reports: 5000 reports
Format: PDF
My questions are:
1) Is both methods workable?
2) Is there any publication/ distribution limit? Is the limitation tied to the number of Named User License & Concurrent session-based License (CSBL)?Any difference for method 1 & 2?
So far i could only found some information for Crystal Report Server 2013:
5 CALs - 100 recipients
10 CALs - 250 recipients
20 CALs - 1000 recipients
250 CALs - unlimited recipients
Does this applied to SAP BI Platform 4.1 also?
3) Any sizing guideline or performance tuning for this kind of mass distribution?
Hi!
I've been searching for answers for quite some time now but without success .
I am trying to find a way to connect a Universe to the CMS Database. I know, there are ways to query the CMS DB (Query Builder, SDK, ...) but I want to connect to it directly (through RESTful API maybe??).
A workaround would be to extract the CMS data through SDK and store it in a different database, but it still isn't an optimal solution.
Any suggestions ?
Regards,
Miha
Hi Community Members,
this time i have a little problem - i cannot determine which universe is being used by the WEBI report.
I've found some articles here around this topic, but using query builder to know which reports are being used by the universe is not an answer.
I have lots of universes and i want to know which one is used by particular report.
Some time ago I was able to do this, by opening report, then i've clicked to 'Data Access' and lateto on 'Edit' and in 'Master Perspective' I've seen universe name with objects being used in the universe.
Lately our users use other kind of universes, I'm not sure how they did this, but somehow in place, that I've seen universe name earlier i can now find some strange name (diferent then my universes) with some objects, like a universe (it should be visible on screen below - marked with orange color).
So please help me - what is this name marken with orange and how to check which universe(universes) is being used by this report.
Hello
I applied the coding to define System Connection to the business intelligence platform according the SAP's Administrator guide 2.2. I copied the example codeon page 42.
Unfortunately the XML code has Errors and is not validated successfully.
What would be the correct coding. Has someone a good and correct example.
Thanks
Christian
Hello there !
We have 2 machines on Windows Server 2012 R2, and installed on both BI4.1 SP7.
On the test machine all works and on the pre-production machine, we have a java problem with the UMT, whne we execute it, we have this error :
We tried many solutions without success, and both machines have the same Java version (7.80 64bits), same OS, etc...
We tried to copy the "upgrademanagementtool.jar" from the test machine to the other one, we execute on a CMD windows :
java.exe -jar "D:\businessobjects\SAP BusinessObjects Enterprise XI 4.0\java\apps\upgradeManagementTool\jars\upgrademanagementtool.jar"
Exception in thread "main" java.lang.NoClassDefFoundError: org/osgi/framework/BundleException
Caused by: java.lang.ClassNotFoundException: org.osgi.framework.BundleException
at java.net.URLClassLoader$1.run(URLClassLoader.java:255)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:243)
at java.lang.ClassLoader.loadClass(ClassLoader.java:372)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:344)
at java.lang.ClassLoader.loadClass(ClassLoader.java:313)
Could not find the main class: com/businessobjects/upgrademanager/bootstrap/Main. Program will exit.
Someone had already this problem maybe ?
Thank you
I installer Crystal Server 13 in a machine and I think that the installation was successful. The Central Configuration Manager can be launched and all the services in there are running properly, based on the information displayed in the application window.
I have another server from which I’m trying to connect to the aforementioned Crystal Server in an attempt to display a report.
I keep getting, however, an API Sockets connection error.
My question is the following: Is there some sort of test utility that I could use to check if the Crystal Server was properly set up to receive and process report requests?
What I’d like to know is if there is some sort of setup error related to Crystal Server or if the problem is on the other machine.
Thanks in advance,
Hector
Promotion management has a great feature to rollback the migration - whats the best way to rollback or truncate the content after migration using PMT? plus is there a way to export the error /object log that failed during migration using UMT to excel or csv or anything?
Thanks
Hello,
Is there way to find all the users with enterprise accounts? Do I have to use Query Builder?
Business Objects 4.1 Support Pack 4 Patch 2
Thanks
Ram
Hi All,
I wanted to know how we implement user security on AO reports built on HANA Calculation Views.
In my calculation view, I am having a BOUSER prompt created along with other set of prompts to restrict the data as per the user authorization for data across zones.
So when I do a AO Excel report on top of this view, it will prompt for BOUSER.
Now, I am looking for a functionality/feasibility where instead of prompting for BOUSER, it should take the USERID logged in as and fetch the data according to the authorization for data.
Ex:
Let us say we have 3 users A, B, C
User A is having access only to see US data
User B is having access to see US and Canada data
User C is having access to see only Canada data
If User A opens the AO report, instead of prompting the user to enter BOUSER, if should consider his loginid as default input for the prompt and fetch only US Data.
Similarly when User B opens the report, it should fetch US and Canada data and same is the case with User C to fetch only Canada data.
Please advice if this is possible, if not are there any work around to achieve this functionality.
Your advice will be really helpful.
Thanks,
Prasad.
Hi Friends
Please Share your Suggestion on this Error.
We used Standared ZRSA3_GET_DATA_SIMPLE while using Generic Extraction in BW (Data Fetching process get error)
RSA3 we can see the data but when we run Info Package in Bw side it is going to infinite Loop and send Error on same.
Please Find ABAP code below Kindly Suggest.
STATICS: S_S_IF_SIMPLE TYPE SRSC_S_IF_SIMPLE,
S_FNAME LIKE TFDIR-FUNCNAME.
IF I_INITFLAG = 'X'.
*====== INIT ===========================================================
*------ create interface structure ------------------------------------
* Check DataSource validity
CASE I_ISOURCE.
WHEN 'ZDS_PS_DEPLOYMENT'.
ENDCASE.
REFRESH S_S_IF_SIMPLE-T_SELECT. "HL note 1011321.
REFRESH S_S_IF_SIMPLE-T_FIELDS. "HL note 1011321.
S_S_IF_SIMPLE-REQUNR = I_REQUNR.
IF NOT I_ISOURCE IS INITIAL.
S_S_IF_SIMPLE-DSOURCE = I_ISOURCE.
ELSE.
S_S_IF_SIMPLE-DSOURCE = I_CHABASNM.
ENDIF.
S_S_IF_SIMPLE-MAXSIZE = I_MAXSIZE.
S_S_IF_SIMPLE-INITFLAG = I_INITFLAG.
APPEND LINES OF I_T_SELECT TO S_S_IF_SIMPLE-T_SELECT.
APPEND LINES OF I_T_FIELDS TO S_S_IF_SIMPLE-T_FIELDS.
DATA L_S_OSOURCE TYPE RSAOT_S_OSOURCE.
CALL FUNCTION 'RSA1_SINGLE_OLTPSOURCE_GET'
EXPORTING
I_OLTPSOURCE = S_S_IF_SIMPLE-DSOURCE
IMPORTING
E_S_OLTPSOURCE = L_S_OSOURCE.
S_FNAME = L_S_OSOURCE-EXTRACTOR.
*-------- call extractor in init mode ---------------------------------
DATA L_DEBUG(1).
IMPORT L_DEBUG FROM MEMORY ID 'RSFH_DBG'.
IF L_DEBUG = RSFH_C_DEBUG_LATE.
BREAK-POINT. "#EC NOBREAK
ENDIF.
CALL FUNCTION S_FNAME
EXPORTING
I_REQUNR = S_S_IF_SIMPLE-REQUNR
I_DSOURCE = S_S_IF_SIMPLE-DSOURCE
I_MAXSIZE = S_S_IF_SIMPLE-MAXSIZE
I_INITFLAG = S_S_IF_SIMPLE-INITFLAG
TABLES
I_T_SELECT = S_S_IF_SIMPLE-T_SELECT
I_T_FIELDS = S_S_IF_SIMPLE-T_FIELDS
EXCEPTIONS
NO_MORE_DATA = 1
ERROR_PASSED_TO_MESS_HANDLER = 2
OTHERS.
ELSE.
*======= FETCH =========================================================
REFRESH E_T_DATA.
CLEAR E_T_DATA.
CLEAR S_S_IF_SIMPLE-INITFLAG.
CALL FUNCTION S_FNAME
EXPORTING
I_REQUNR = S_S_IF_SIMPLE-REQUNR
I_ISOURCE = S_S_IF_SIMPLE-DSOURCE
I_DSOURCE = S_S_IF_SIMPLE-DSOURCE "30C
I_MAXSIZE = S_S_IF_SIMPLE-MAXSIZE
I_INITFLAG = S_S_IF_SIMPLE-INITFLAG
TABLES
I_T_SELECT = S_S_IF_SIMPLE-T_SELECT
I_T_FIELDS = S_S_IF_SIMPLE-T_FIELDS
E_T_DATA = E_T_DATA
EXCEPTIONS
NO_MORE_DATA = 1
ERROR_PASSED_TO_MESS_HANDLER = 2
OTHERS = 3.
ENDIF.
*========= ERROR HANDLING ==============================================
CASE SY-SUBRC.
WHEN '0'.
WHEN '1'. RAISE NO_MORE_DATA.
WHEN '2'.
IF NOT ( SY-MSGTY IS INITIAL OR
SY-MSGID IS INITIAL OR
SY-MSGNO IS INITIAL ).
* LOG_WRITE SY-MSGTY SY-MSGID SY-MSGNO SY-MSGV1 SY-MSGV2.
ENDIF.
RAISE ERROR_PASSED_TO_MESS_HANDLER.
WHEN OTHERS.
IF NOT ( SY-MSGTY IS INITIAL OR
SY-MSGID IS INITIAL OR
SY-MSGNO IS INITIAL ).
* LOG_WRITE SY-MSGTY SY-MSGID SY-MSGNO SY-MSGV1 SY-MSGV2.
ENDIF.
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDCASE.
ENDFUNCTION.
**************************************************************************
*FUNCTION ZRSAX_BIW_GET_DATA_SIMPLE.
**"----------------------------------------------------------------------
**"*"Local Interface:
**" IMPORTING
**" REFERENCE(I_REQUNR) TYPE SBIWA_S_INTERFACE-REQUNR
**" REFERENCE(I_ISOURCE) TYPE SBIWA_S_INTERFACE-ISOURCE
**" REFERENCE(I_MAXSIZE) TYPE SBIWA_S_INTERFACE-MAXSIZE
**" REFERENCE(I_INITFLAG) TYPE SBIWA_S_INTERFACE-INITFLAG
**" REFERENCE(I_UPDMODE) TYPE SBIWA_S_INTERFACE-UPDMODE
**" REFERENCE(I_DATAPAKID) TYPE SBIWA_S_INTERFACE-DATAPAKID
**" REFERENCE(I_PRIVATE_MODE)
**" REFERENCE(I_CALLMODE) LIKE ROARCHD200-CALLMODE
**" REFERENCE(I_REMOTE_CALL) TYPE SBIWA_FLAG
**" TABLES
**" I_T_SELECT TYPE SBIWA_T_SELECT
**" I_T_FIELDS TYPE SBIWA_T_FIELDS
**" E_T_DATA
**" E_T_SOURCE_STRUCTURE_NAME
**" EXCEPTIONS
**" NO_MORE_DATA
**" ERROR_PASSED_TO_MESS_HANDLER
**"----------------------------------------------------------------------
** Auxiliary Selection criteria structure
* DATA: L_S_SELECT TYPE SRSC_S_SELECT.
*
** Maximum number of lines for DB table
* STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
* S_COUNTER_DATAPAKID LIKE SY-TABIX.
*
** Select ranges
* RANGES: L_R_PGMID FOR TADIR-PGMID,
* L_R_OBJECT FOR TADIR-OBJECT.
*
* IF I_INITFLAG = SBIWA_C_FLAG_ON.
* IF NOT G_FLAG_INTERFACE_INITIALIZED IS INITIAL.
*
* IF 1 = 2. MESSAGE E008(R3). ENDIF.
* LOG_WRITE 'E' "message type
* 'R3' "message class
* '008' "message number
* ' ' "message variable 1
* ' '. "message variable 2
* RAISE ERROR_PASSED_TO_MESS_HANDLER.
* ENDIF.
** Check DataSource validity
* CASE I_ISOURCE.
* WHEN 'ZDS_PS_DEPLOYMENT'.
* WHEN OTHERS.
* IF 1 = 2. MESSAGE E009(R3). ENDIF.
** this is a typical log call. Please write every error message like this
* LOG_WRITE 'E' "message type
* 'R3' "message class
* '009' "message number
* I_ISOURCE "message variable 1
* ' '. "message variable 2
* RAISE ERROR_PASSED_TO_MESS_HANDLER.
* ENDCASE.
*
** Check for supported update mode
* CASE I_UPDMODE.
* WHEN 'F'.
* WHEN 'D'.
* WHEN 'I'.
* WHEN OTHERS.
* IF 1 = 2. MESSAGE E011(R3). ENDIF.
* LOG_WRITE 'E' "message type
* 'R3' "message class
* '011' "message number
* I_UPDMODE "message variable 1
* ' '. "message variable 2
* RAISE ERROR_PASSED_TO_MESS_HANDLER.
* ENDCASE.
*
** Check for obligatory selection criteria
* READ TABLE I_T_SELECT INTO L_S_SELECT WITH KEY FIELDNM = 'PGMID'.
* IF SY-SUBRC <> 0.
* IF 1 = 2. MESSAGE E010(R3). ENDIF.
* LOG_WRITE 'E' "message type
* 'R3' "message class
* '010' "message number
* 'PGMID' "message variable 1
* ' '. "message variable 2
* RAISE ERROR_PASSED_TO_MESS_HANDLER.
* ENDIF.
*
* APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
*
** Fill parameter buffer for data extraction calls
* G_S_INTERFACE-REQUNR = I_REQUNR.
* G_S_INTERFACE-ISOURCE = I_ISOURCE.
* G_S_INTERFACE-MAXSIZE = I_MAXSIZE.
* G_S_INTERFACE-INITFLAG = I_INITFLAG.
* G_S_INTERFACE-UPDMODE = I_UPDMODE.
* G_S_INTERFACE-DATAPAKID = I_DATAPAKID.
* G_FLAG_INTERFACE_INITIALIZED = SBIWA_C_FLAG_ON.
*
** APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
* APPEND LINES OF I_T_FIELDS TO G_T_SEGFIELDS.
*
** Start tracing of extraction
* BICE_TRACE_OPEN G_R_TRACER I_T_FIELDS.
* ELSE.
** IF SY-BATCH EQ SPACE.
* IF G_COUNTER_DATAPAKID = 0.
*
* LOOP AT G_T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'PGMID'.
* MOVE-CORRESPONDING L_S_SELECT TO L_R_PGMID.
* APPEND L_R_PGMID.
* ENDLOOP.
*
* LOOP AT G_T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'OBJECT'.
* MOVE-CORRESPONDING L_S_SELECT TO L_R_OBJECT.
* APPEND L_R_OBJECT.
* ENDLOOP.
*
** I_MAXSIZE = G_S_INTERFACE-MAXSIZE.
*
* DATA LT_TBL TYPE STANDARD TABLE OF ZPS_DEPLOYMENT.
*
* CALL FUNCTION 'ZPS_DEPLOYMENT_BW_FM'
* IMPORTING
* EX_OUTPUT = E_T_SOURCE_STRUCTURE_NAME.
** E_T_SOURCE_STRUCTURE_NAME = LT_TBL[].
* ENDIF.
* BICE_TRACE_CLOSE G_R_TRACER.
* BICE_COLLECT_TABLE G_R_TRACER E_T_DATA.
** S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
* G_COUNTER_DATAPAKID = G_COUNTER_DATAPAKID + 1.
** ENDIF.
* ENDIF.
*ENDFUNCTION.
Want to know details about the authentication. When a user logs in to BIP with an enterprise alias does it get encrypted?
Hi All.
SAP BO 4.1 SP7 ON LINUX
ORACLE DB
Users/group in QA is taking too long to populate. Dev and prod are good.
I have updated LDAP authentication, but still takes longer time to load.
It takes about 30mins to open, but will not allow to select.
Any solution will help
Thanks
Coupon
First off, I'm new to universe work. So thanks in advance!
I have a universe and I'm getting the " ora-01775: looping chains of synonyms State: N/A" when I parse an object.
I'm not sure if this is a universe issue, database issue, or access issue.
I look in the db and found a synonym with the same name as my object. I saw that the table owner is v500.
I tried to update my object by using that owner like so:
v500.tracking_checkin.tracking_id but this didn't help.
Since the error message mentions loop, I thought of checking for the loops in this unvierse and there are 500 or more. I say more because the tool said that not all of the cardinalities had been set. Looking through 500 loops to isolate one that "might" be associated with my issue seems impossible.
Am I looking in the wrong direction?
Thanks Scott
oracle 11g
bo 4.1 sp3
resently migrated from bo3.1 to bo4.1
I've attached screen shot of universe and object properties. The site wouldn't take my file.
Hi,
We did a custom components and driver install during our initial platform installation and we missed a few drivers that we want to include now. Now we can run the setup as "modify" and include the missing drivers. Now i think if i run the modify then the tomcat files will be updated/reset also. before i ran the a "modify" or "repair" i had a few questions:
1- whats the difference between running setup as "Modify" vs ""repair"
2- If i run as "Modify" then i am assuming it will update/reset my tomcat files such as web.xml and server.xml file - is that correct? and will running as "repair" updates/resets tomcat files also?
3- When we run a fix pack or update service packs on business objects, does that update/reset tomcat files also?
Thanks
Hi Experts,
I am facing an issue in BusinessObjects/HANA.
BO platform : BO 4.1 SP7
HANA : SPS08
In HANA if we add an Input Parameter/Variable, it will show in BO-Information Design Tool(IDT) while refreshing structure of the Data Foundation.
But i am facing an issue that it's not showing IP/Variable in BO 4.1 Sp6 patch 1 to higher level. (Tried SP6 Patch1, SP6 Patch2 and SP7).
But it will work in BO 4.1 SP6.
So we have a doubt, is that because of the version of HANA is not compatible with the BO ? Is there any remedy by installing any patch file in BO to make it compatible or any other solution please let me know.
Thanks in advance.
Das